Name

Stainless steel flood control flap, made of SUS304 stainless steel material, the structure is made of stainless steel panel, plus stainless steel square welded into a body, at both ends of the entire stainless steel water baffle, configured with 304 stainless steel columns, play the role of fixing the water baffle, if a single door or passage mouth is too wide, can be configured in sections, in the middle to increase two-way columns. At the top of the column, there are top-down reinforcement screws that can press the water barrier tightly to increase the water barrier capacity of the baffle. In the lower part of the stainless steel baffle, a rubber strip with good flexibility is attached to make the water barrier better.

Station entrance and exit flood baffle: made of aluminum alloy plate, thickness is 2mm. The water baffle consists of panels and column slots on both sides. The length of the panel is the width of the entrance, the middle of the panel is set with stainless steel hinges (can be folded in half, convenient for manual handling), and several stainless steel supports that can be opened and closed are set at the back, and the support points are set with adjustable devices; The weight of each water baffle is designed to not exceed 50kg; The height of the columns on both sides is about 500mm, the material is made of 2mm thick stainless steel plate, and the bolt locking device is set; The bottom of the baffle, the column and the hinge part are added with sealant skin to prevent water seepage.